Smoked Ribs using the 3-2-1 Method

3-2-1 ribs. I always wondered when I first got my smoker what it meant to smoke ribs 3-2-1 method. There is no food that screams summer to me than a rack of smoked pork ribs. I want them to be coated with rub, smothered in sauce and smoked to perfection. Also, they need to be tender and juicy!

Ribs, if cooked improperly, can result in tough meat that has to be ripped off the bone. If cooked the right way, ribs can be tender juicy and fall of the bone delicious! This method, often called 3-2-1, is easy and generally fool proof. It creates ribs that are so tender that you can pull the meat off the bone with your fingers.

3-2-1 Ribs Method

3  

This first stage is the stage where the ribs are smoked for 3 hours. Set the smoker is set for 225F to create a low and slow smoke. Make sure the ribs are generously coated with a good BBQ rub. Here is a recipe for my rub which is great on ribs! 3 hours of smoking is the recommended time for pork spare ribs. If you are smoking back ribs you may want to smoke them for just 2 hours. Any more and you may find it dries the ribs out a bit too much. I have used hickory, apple, cherry, alder and maple woods with this method of smoking ribs. My preference is hickory or apple although the ribs taste wonderful with any of those types of wood. Before I got a smoker I used my gas grill to simulate smoking. It can work somewhat but it does not generate near the level of smoke in the unit. Also sometimes it is difficult to get a gas grill to have a consistently low temperature like 225F. Directions for using a gas grill are below. 

2  

The second stage is where the meat tenderizes. If you like your ribs to be fall off the bone tender then make sure you do this step. Wrap the ribs tightly in foil. This steams the ribs and the result is tender juicy ribs. Just before closing each rack of ribs in the foil, put a little bit of beer or apple juice in with the ribs. This helps the steaming process. Put the ribs, wrapped in foil, back in the smoker for 2 hours at 225F. My smoker can function as an oven and so, for this stage, I turn off the smoking element in my smoker and actually just bake them in the smoker at 225F for the 2 hours. Some people continue to smoke for these 2 hours as well. It is also possible to use an oven for this stage.

1  

This final stage is when you sauce the ribs. Make sure you use your favourite BBQ sauce and liberally coat the ribs on both sides. Then back in the smoker set for 225F for 1 final hour.  Again, it is possible to use an oven for the last hour. Personally, I like to smoke them for the final hour. It creates a wonderfully smokey flavour in the BBQ sauce.  The result is tender ribs that have a full on smokey flavour with so much seasoning in the rub and sauce. This 3-2-1 method is easy and guarantees that you will have ribs you will never forget!

Some great BBQ rub recipes

Some of my BBQ sauce recipes

For those interested in what smoker I have, it is a Bradley Electric Smoker with 4 racks. You can see the link to it at the Amazon store to the right. I highly recommend it. It is set-it-and-forget-it easy!

Prep the ribs first!

Peel off the membrane on the underside of the rack of ribs.

Generously rub the BBQ rub on the the ribs before smoking. Let the rub penetrate in the meat for an hour or as long as you can before smoking it.

Step 1: The 3 in the 3-2-1

Smoke the ribs in a 225F smoker for 3 hours. If you do not have a smoker, there are directions below for simulating a smoker with your gas grill.

Step 2: The 2 in the 3-2-1

This second stage is where the meat gets super tender. The ribs get wrapped in foil and this essentially steams them which causes the connective tissues to break down and the meat to tenderize.

If desired pour a little bit of liquid in with the ribs. I usually use about 1/3 cup for each rack of ribs. You can use beer, pop or juice. They all work great!

Wrap the ribs with foil and continue to cook at 225F for 2 hours. If you are cooking back ribs, you may want to only cook for 1 hour. Side ribs need the 2 hours, but I have found that back ribs turn out just as well cooking for just 1 hour in this second step.

Step 3: The 1 in the 3-2-1

Sauce the ribs with your favourite BBQ sauce and smoke at 225F for a final hour.

Open up the foil and you will see the steam escape. This process tenderizes the meat and you will see how the meat is pulling away from the rib bones.

Gently lift the ribs out of the foil. Be careful as they can fall apart cause they are so tender. Place the ribs back on the smoker rack and brush with your favourite BBQ sauce.

Place the ribs back in the smoker for the final hour!

These ribs are full of flavour and incredibly tender. Once you take them out of the smoker, you can cut and divide them up and serve them immediately!

If you want another recipe for smoked ribs check out: Honey Sriracha Smoked Pork Side Ribs

Smoked Ribs using the 3-2-1 Method

4.95 out of 5
59 reviews
Print
3-2-1 ribs! These instructions for smoking pork spareribs and baby back ribs, using the 3-2-1 method, create tender fall off the bone ribs. Cooked in an electric Bradley Smoker
Prep Time: 15 minutes
Cook Time: 6 hours
Total Time: 6 hours 15 minutes
Servings: 8

Ingredients

  • 2 racks pork ribs
  • 1 cup Steve's BBQ rub
  • 1/2 cup beer, pop or apple juice
  • 1 1/2 cups BBQ sauce

Instructions

  • Peel the membrane off the back of each rack of ribs. Generously rub the BBQ spice rub all over the ribs.
  • These are directions to smoke the ribs in a smoker.Set the smoker to 225F and use your wood of choice (I use hickory and apple most often). Place the ribs in the smoker and smoke for 3 hours if they are spareribs and 2 hours if they are back ribs.
  • After the ribs have been in the smoker for 3 hours, take them out and wrap each rack with aluminum foil. Pour a 1/4 cup of beer, pop or apple juice with each rack of ribs. Fold over the foil and pinch all the edges to ensure that it is sealed well to allow steaming.
  • If your smoker can function as an oven (like Bradley smokers) place the ribs wrapped in foil back in the smoker for another 2 hours. It is also possible to use an oven for this stage. Have it set for 225F and bake them for 2 hours.
  • After these 2 hours, remove the ribs carefully from the foil. Generously coat the ribs in your favourite BBQ sauce. Put them back in the smoker set for 225F for 1 final hour. It is also possible to use the oven for this stage.

Notes

Directions to smoke the ribs on your gas grill:
Setup your barbecue for indirect grilling. To do this place a metal pan or tray under the grill where the ribs will cook. Fill the pan 3/4 full of water. The water helps the ribs ‘slow cook’ and keeps the heat down. How to make a smoker pouch: Make a pouch of aluminum foil and fill with the wood chips. Close the foil pouch and poke a few times with a knife so the smoke can escape. Place the pouch, under the grill in the barbecue but not right under where the ribs will be. Heat the barbecue to about 225 F. Place the ribs on the grill and and close the lid. Cook for about 2-3 hours. If after the first 2 hours the ribs are looking well cooked and browning, it may be best to remove them from the grill.

 

Categories

Did you try this recipe?

Leave a comment and let me know how it turned out. Or, take a picture to share on Instagram and tag me @theblackpeppercorn.

Leave a comment

Recipe Rating




131 comments

  • WOW! I’d never heard of the 3-2-1 method before but I am a true believer now!! We had three racks of back ribs and a new smoker all ready for Father’s Day but not really sure how to make it all work together. Found this recipe and followed it (including the BBQ Rub). We tried out one rack tonight just to make sure and MAN!! It was awesome!! My 11-year old son ate half the rack on his own. My family is going to love me tomorrow! Thank you!!

    • Reply
    • So happy to get this message Kelly! Glad you enjoyed them and my 11 year old will eat half a rack as well.

      • Reply
  • The most frustrating part of ribs has always been the membrane. Problem solved — use pliers to grab the edge and tear down. Worked like a charm.

    • Reply
  • 5 stars
    I happened upon this recipe as I was debating on buying a smoker attachment for my grill. After seeing this, I decided to pick one up and boy was I not disappointed. Even though I am still going through the trial and error stages of smoking, the ribs turned out GREAT! I have never been a big fan of ribs, though I have had some that I thought were good. After my first batch today, I know what good ribs are. Your method/rub has turned me into a true rib fan! I don’t know if I could ever go back to the ribs of the past now.

    Now I just need to work on pulling the ribs from the foil without them falling apart.

    • Reply
  • This was my first time smoking anything and my wife and I both loved the ribs. I used an electric smoker and they turned out great. The thing thing I loved best was I had freedom to get other things while the ribs doing their thing. I did have one question though. I forgot to add water to my smoker and wondered if it hurt anything?

    • Reply
    • So glad you enjoyed them! Not adding water is not a major thing. Really, what it does is snuff out the fire/smoke in the wood puck once it falls off the burn plate. The greatest fear without the water is that it could truly catch fire in the smoker. So, water is advisable, but I am glad nothing happened this time round. Happy smoking!

      • Reply
  • So we should do step one and two then refrigerate and reheat in the oven for step three the next day and hey won’t be overcooked? I’m assuming 225?

    • Reply
    • This can work really well. I would raise the temperature in the oven. Maybe 275. Smoker temp and oven temps are not always equal.

      • Reply
  • 4 stars
    Im trying this out today we will see how it goes I’ve never smoked ribs before but this seems like its working so far

    • Reply
    • Hope you enjoy them Ethan. I have some in the fridge ready for a Super Bowl Sunday smoke!!!

      • Reply
  • 5 stars
    I’ve done this recipe twice now in my old timey cinder block smoker. Normally I smoke pork shoulders to make BBQ, but I hadn’t really gotten into ribs yet. Well, I’m now hooked! These ribs ROCK! Best I’ve ever had! The only difference was that I used hickory and pecan as my smoke wood. Thanks so much for posting this. The apple juice/beer step is crucial. Oh, and I used Carolina Treet sauce which really took the smoke well.

    • Reply
  • So quick question after you putt BBQ sauce for last hour do you put them back in aluminum foil? Sorry new to smoking

    • Reply
    • No – the last hour with the BBQ sauce is without the foil. It greats a nice saucy glaze on the ribs.

      • Reply
  • 5 stars
    I used this method today and they came out incredible. I will use a little bit less cayenne next time because some of my guests don’t like the heat. Otherwise this is the way I’m going to smoke my ribs every time.

    • Reply
  • 5 stars
    I googled smoked ribs yesterday and found your 3-2-1 method. The ribs were outstanding and the most tender ribs I’ve ever eaten. I’d pick up a rib to eat it and by the time it got to my mouth all there was was the bone left… the meat just fell off. Thanks for this excellent method for the best ribs ever!

    • Reply
  • Steve, it’s 11pm and now I’m starving after reading all your recipes. I’d really like to try the 3-2-1 ribs but I have a question since I will be traveling this weekend. If I were to smoke them at home on Friday and wanted to finish them at a friends cottage on Saturday, where in the 3-2-1 process would I split it? Smoke and cook at home and then just finish on Saturday or just smoke at home and cook and finish on Saturday? I figured I’d ask the expert.

    • Reply
    • Hey Brian! That is a great question. What I would do is smoke and cook the ribs at home and just do the last hour to finish them at the cottage. I would keep them wrapped in the foil for the trip as well. That way they do not dry out at all between the smoking and the last stage. I think they should still be very moist and turn out great.

      • Reply
      • So it would be safe to do the first two steps, leave them in he foil wrap and refrigerate, then warm the next day in the oven? I’m assuming at about 225. They would still be nice and tender without over cooking?

        • Reply
        • This can work really well. I would raise the temperature in the oven. Maybe 275. Smoker temp and oven temps are not always equal.

          • Reply
  • Great method the 3-2-1….. dont see the need for barbecue sauce though. Full flavor without. Maybe on the side.

    • Reply
  • 4 stars
    Steve, made baby backs using your rub and your 2-2-1 (for baby backs) recipe. Totally fall-off-the-bone smoked and delicious. My wife, who is a very fussy eater, gave me (and you, therefore) the ultimate (for her) compliment when she said, “Honey, those were excellent ribs.” Your recipe was totally easy to follow and complete. One quick question–if I wanted to have some pull and chew to them, how do you think I should adjust my times.
    Thanks, rib-bro!!

    • Reply
    • Hi Ken! So glad you and your wife enjoyed the ribs. The 2nd stage is really the time when they are tenderized. You could try adjusting the time from 2-2-1 to 3-1-1. I have found that moving one hour into the 1st stage can result in ribs with a bit more pull. If you try that in the future, let me know how that works for you. Thanks for stopping by!!

      • Reply
      • 5 stars
        Thanks for the advice, Steve! I actually tried to give you 5 stars for your recipes, but my fingers are too big for the little tablet I was typing on, and once you indicate how many stars you want to give a recipe, the app will not let you change it. Something the webmaster might want to tweak a bit.

        • Reply
  • Steve, sorry for the delay. The ribs came out amazing! I cooked 2 St. Louis racks using mesquite & apple wood. They were a hit! The meat was perfectly tender and easily came of the bone. That last hour appeared to be crucial in firming them up a bit. Right out of the foil they were almost falling apart. All in all they were great. This will be my new way of smoking ribs. It’s simple & fool proof. Thanks for sharing. A+++

    • Reply
    • Kevin – Thanks for your comments. I am so glad you enjoyed them! You are correct, right out of the foil they are close to falling apart as they are really tenderized during that second stage. The last hour helps them stay together but they still are fall off the bone tender.

      • Reply
  • I am smoking a rack of Baby Back Ribs at the moment in my 22.5″ Weber Kettle. Had some thunderstorms this afternoon that delayed my start.

    After trimming the ribs, removing the membrane, and patting them dry, I applied a thin layer of yellow mustart and then applied Lambert’s Barbeque Sweet Rub O’ Mine as a rub. I let them rest for a while.

    I arranged the Kingsford Hickory briquettes along one edge of the kettle, three deep in two rows.

    I foiled the rest of the lower coal grill and created a vertical diffuser/barrier with heavy-duty aluminum foil.

    I lit some briquettes on the side and after ashed over, I put them on top of one end of the line of briquettes.

    I placed a large disposable drip pan beneath where the ribs would cook and filled it with about 3 cups of water to stabilize temperature in the kettle.

    After 3 hours, I removed the ribs from the kettle and placed them on heavy-duty aluminum foil coated with Pierce’s BBQ sauce from Williamsburg, VA (thinned with water and mixed with cayenne powder). I carefully coated the remainder of the surface of the ribs with the mixture and tightly wrapped them in the foil, making sure that there were no leaks.

    I placed them back onto the Weber Kettle (indirect heat) at 225 deg. It’s been an hour now, so I still have some time to go before I remove them from the foil and give them a final baste for a nice finish.

    • Reply
    • Sounds amazing! Wish I was there for a taste.

      • Reply
  • Made ribs today with your rub and 3-2-1 method and I have to say it worked out amazing!! I tweaked the rub a little, but overall this method just makes it so easy and delicious! It was my 1st time and will certainly not be my last!! Thanks!

    • Reply
    • So glad you enjoyed the recipe. Thanks for stopping by!

      • Reply
  • This method sounds awesome! I will be trying it on my Big Green Egg on Friday. I will post up the results.

    • Reply
    • Oooh. Very interested to hear how this recipe works in the BGE. Looking forward to your feedback on that!

      • Reply
  • When smoking bone side down or meat side

    • Reply
    • I smoke bone side down.

      • Reply
  • 5 stars
    Made these in a Brinkmann electric smoker with peach wood. Turned out great. I have always been lacking in the rib department. But these turned out great with my own applewood rub and my hickory BBQ sauce. I have gotten pork shoulder and chicken down but these are the first “spot on” spare ribs I have made.

    • Reply
  • 5 stars
    I too have a Bradley Smoker, exact same model, so I am wondering what you have in the cassarole dish on the bottom rack? Side dish or something else?

    • Reply
    • Those are Smoked Baked Beans – Here is the link – https://www.theblackpeppercorn.com/smoked-baked-pork-and-beans/

      I make these beans ALL THE TIME and they are turning into one of the most popular things I smoke.

      • Reply

Subscribe to the newsletter and never miss a recipe!